Adds squid to dev/CI stacks

- for testing forwarded ip address later

docker/dev/squid.conf

@@ -0,0 +1,92 @@
+#	WELCOME TO SQUID 6.6
+#	----------------------------
+#
+#	This is the documentation for the Squid configuration file.
+#	This documentation can also be found online at:
+#		http://www.squid-cache.org/Doc/config/
+#
+#	You may wish to look at the Squid home page and wiki for the
+#	FAQ and other documentation:
+#		http://www.squid-cache.org/
+#		https://wiki.squid-cache.org/SquidFaq
+#		https://wiki.squid-cache.org/ConfigExamples
+#
+
+# Example rule allowing access from your local networks.
+# Adapt to list your (internal) IP networks from where browsing
+# should be allowed
+acl localnet src 0.0.0.1-0.255.255.255	# RFC 1122 "this" network (LAN)
+acl localnet src 10.0.0.0/8		# RFC 1918 local private network (LAN)
+acl localnet src 100.64.0.0/10		# RFC 6598 shared address space (CGN)
+acl localnet src 169.254.0.0/16 	# RFC 3927 link-local (directly plugged) machines
+acl localnet src 172.0.0.0/8
+acl localnet src 192.168.0.0/16		# RFC 1918 local private network (LAN)
+acl localnet src fc00::/7       	# RFC 4193 local private network range
+acl localnet src fe80::/10      	# RFC 4291 link-local (directly plugged) machines
+
+acl SSL_ports port 443
+acl Safe_ports port 80		# http
+acl Safe_ports port 81
+acl Safe_ports port 443		# https
+
+#
+# Recommended minimum Access Permission configuration:
+#
+# Deny requests to certain unsafe ports
+http_access deny !Safe_ports
+
+# Deny CONNECT to other than secure SSL ports
+http_access deny CONNECT !SSL_ports
+
+# Only allow cachemgr access from localhost
+http_access allow localhost manager
+http_access deny manager
+
+# This default configuration only allows localhost requests because a more
+# permissive Squid installation could introduce new attack vectors into the
+# network by proxying external TCP connections to unprotected services.
+http_access allow localhost
+
+# The two deny rules below are unnecessary in this default configuration
+# because they are followed by a "deny all" rule. However, they may become
+# critically important when you start allowing external requests below them.
+
+# Protect web applications running on the same server as Squid. They often
+# assume that only local users can access them at "localhost" ports.
+http_access deny to_localhost
+
+# Protect cloud servers that provide local users with sensitive info about
+# their server via certain well-known link-local (a.k.a. APIPA) addresses.
+http_access deny to_linklocal
+
+#
+# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
+#
+include /etc/squid/conf.d/*.conf
+
+# For example, to allow access from your local networks, you may uncomment the
+# following rule (and/or add rules that match your definition of "local"):
+# http_access allow localnet
+
+# And finally deny all other access to this proxy
+http_access deny all
+
+# Squid normally listens to port 3128
+http_port 3128
+
+# Leave coredumps in the first cache dir
+coredump_dir /var/spool/squid
+
+#
+# Add any of your own refresh_pattern entries above these.
+#
+refresh_pattern ^ftp:		1440	20%	10080
+refresh_pattern -i (/cgi-bin/|\?) 0	0%	0
+refresh_pattern \/(Packages|Sources)(|\.bz2|\.gz|\.xz)$ 0 0% 0 refresh-ims
+refresh_pattern \/Release(|\.gpg)$ 0 0% 0 refresh-ims
+refresh_pattern \/InRelease$ 0 0% 0 refresh-ims
+refresh_pattern \/(Translation-.*)(|\.bz2|\.gz|\.xz)$ 0 0% 0 refresh-ims
+# example pattern for deb packages
+#refresh_pattern (\.deb|\.udeb)$   129600 100% 129600
+refresh_pattern .		0	20%	4320
+